How to Use Renesas Flash Programmer 2.05 for RL78, RX, RH850, and Other MCUs
Renesas Flash Programmer 2.05 Download: A Guide for Beginners
If you are looking for a reliable and easy-to-use tool to program the on-chip flash memory of Renesas microcontrollers, you might want to try Renesas Flash Programmer 2.05. This software provides usable and functional support for programming the flash memory in each phase of development and mass production. In this article, we will show you how to download, install, and use Renesas Flash Programmer 2.05, as well as how to troubleshoot some common errors.
renesas flash programmer 2.05 download
What is Renesas Flash Programmer?
Renesas Flash Programmer is a flash memory programming software that allows you to program the on-chip flash memory of Renesas microcontrollers under PC control. You can use it with various programming methods, such as using an emulator, a serial or USB connection, or a script file. You can also save your programming settings in workspace files for future use.
Features and functions of Renesas Flash Programmer
Some of the main features and functions of Renesas Flash Programmer are:
Support for programming under PC control
Ability to save programming settings in workspace files
Support for two types of programming operation modes (basic mode and full mode)
Support for automated programming using scripts
Programming a unique code to a designated area of flash memory
Reading of program files
Checksum of program files (Supported for RL78, 78K0, 78K0R, or V850)
Blank check, erase, writing, verification, read-out, security setting, checksum, autoprocedure, setup and acquisition of flash options
Operation option for sequential execution of multiple commands
Supported devices and programming methods
Renesas Flash Programmer supports a wide range of devices from different families, such as RL78, RX, RH850, Renesas Synergy, V850, 78K0R, and 78K0. You can check the list of supported devices on the product page or in the user's manual.
You can also choose from different programming methods depending on your device and environment. The supported programming methods are:
renesas flash programmer v2 free evaluation software
renesas flash programmer v2 license purchase
renesas flash programmer v2 technical support
renesas flash programmer v2 user manual
renesas flash programmer v2 supported devices
renesas flash programmer v2 basic mode
renesas flash programmer v2 full mode
renesas flash programmer v2 script function
renesas flash programmer v2 checksum calculation
renesas flash programmer v2 security setting
renesas flash programmer v2 migration to v3
renesas flash programmer v3 latest version
renesas flash programmer v3 features and functions
renesas flash programmer v3 comparison with v2
renesas flash programmer v3 system requirements
renesas flash programmer v3 workspace files
renesas flash programmer v3 operation modes
renesas flash programmer v3 automated programming
renesas flash programmer v3 unique code programming
renesas flash programmer v3 user interface options
renesas flash programming gui for microcontrollers
renesas flash programming gui overview and release info
renesas flash programming gui documentation and downloads
renesas flash programming gui product information page
renesas flash programming gui evaluation software download
renesas flash development toolkit for superh risc engine family
renesas flash development toolkit for rx family
renesas flash development toolkit for r8c family
renesas flash development toolkit for m16c family
renesas flash development toolkit for h8sx family
renesas flash development toolkit for h8s family
renesas flash development toolkit for h8 family
renesas flash development toolkit for 740 family
renesas flash development toolkit latest version download
renesas flash development toolkit license and support information
renesas on-chip flash memory programming software tools
renesas on-chip flash memory programming software tools overview and features
renesas on-chip flash memory programming software tools supported devices and interfaces
renesas on-chip flash memory programming software tools user's manual and application notes
renesas on-chip flash memory programming software tools installation guide and troubleshooting
how to program the on-chip flash memory of renault microcontrollers using renaults software tools
how to use renaults software tools for each phase of development and mass production of renault microcontrollers
how to perform blank check, erase, write, verify, read-out, and autoprocedure functions with renaults software tools
how to set up and acquire the flash options of renault microcontrollers with renaults software tools
how to execute multiple commands sequentially with renaults software tools
how to perform checksum of program files with renaults software tools
how to use the script function of renaults software tools for automated programming
how to program a unique code to a designated area of the on-chip flash memory with renaults software tools
how to migrate from renaults software tools version 2 to version 3
E2 emulator/E2 emulator Lite/E20 emulator/Segger J-Link debug probes (for RL78/RX/RH850/Renesas Synergy)
Serial connection (for RL78/78K0R/78K0/V850)
USB connection (for RL78/78K0R/78K0/V850)
Script file (for all supported devices)
How to download and install Renesas Flash Programmer 2.05?
System requirements and license information
Before you download and install Renesas Flash Programmer 2.05, you need to make sure that your PC meets the following system requirements:
Operating system: Windows 10/8.1/7 (32-bit or 64-bit)
CPU: Pentium III 800 MHz or higher (recommended)
Memory: 256 MB or more (recommended)
Disk space: 100 MB or more (required)
Display resolution: 1024 x 768 pixels or higher (required)
USB port: USB 2.0 or higher (required for USB connection)
Serial port: RS-232C compatible (required for serial connection)
You also need to obtain a license to use Renesas Flash Programmer 2.05. You can get a free trial license for 60 days or purchase a permanent license from the product page. You will receive a license key file by email after you register your information. You will need this file to activate the software later.
Download link and installation steps
To download Renesas Flash Programmer 2.05, you need to visit the product page and click on the "Download" button. You will be asked to agree to the terms and conditions before you can proceed. You will then be redirected to a download page where you can choose the appropriate version for your operating system. The file size is about 70 MB.
After you download the file, you need to unzip it and run the setup.exe file. Follow the instructions on the screen to complete the installation. You will be asked to select the destination folder, the components to install, and the start menu folder. You will also be asked to enter your license key file or browse for it on your PC. Once the installation is finished, you can launch Renesas Flash Programmer 2.05 from the start menu or the desktop shortcut.
How to use Renesas Flash Programmer 2.05?
Basic mode and full mode
Renesas Flash Programmer 2.05 has two types of programming operation modes: basic mode and full mode. Basic mode is suitable for simple and quick programming operations, such as writing or verifying a program file. Full mode is suitable for more advanced and customized programming operations, such as setting flash options, reading out data, or using scripts.
To switch between basic mode and full mode, you can use the "Mode" menu on the top of the main window. You can also change the default mode in the "Options" menu. The main window will show different tabs and buttons depending on the mode you choose.
Programming operation examples
In this section, we will show you some examples of programming operations using Renesas Flash Programmer 2.05 in basic mode and full mode. These examples are based on the user's manual and assume that you have connected your device to your PC using an emulator or a serial/USB cable.
Basic mode: Writing a program file
To write a program file to your device in basic mode, follow these steps:
Select your device from the "Device" drop-down list on the "Basic" tab.
Select your programming method from the "Connection" drop-down list.
Click on the "Browse" button next to the "Program File" field and select your program file (.mot, .hex, .srec, or .bin).
Click on the "Write" button on the toolbar or press F5.
A progress bar will appear and show you the status of the writing operation. When it is done, a message box will pop up and inform you of the result.
Full mode: Reading out data
To read out data from your device in full mode, follow these steps:
Select your device from the "Device" drop-down list on the "Full" tab.
Select your programming method from the "Connection" drop-down list.
Click on the "Read Out" tab and specify the address range and format of the data you want to read out.
Click on the "Read Out" button on the toolbar or press F9.
A progress bar will appear and show you the status of the read-out operation. When it is done, a message box will pop up and ask you where